Wiren Board 4: Модуль расширения RS-232/en: различия между версиями
(Новая страница: «with») |
(Новая страница: «and '''reboot controller''' by command») |
||
Строка 33: | Строка 33: | ||
</pre> | </pre> | ||
and '''reboot controller''' by command | |||
<pre> | <pre> |
Версия 20:43, 19 июля 2019
Pinout
The RS-232 signals are output to the terminals of the O1-O3 extension module.
Pinout:
- O1 - GND
- O2 - TX
- O3 - RX
Multiplexing
The RS-232 module is multiplexed with an uninsulated RS-485 port. Their simultaneous operation is not allowed
Configuration
To work with RS-232, the Wiren Board kernel must be configured in a specific way.
In the
/boot/uEnv.txt
file
you need to replace the line
fdt_file=/boot/dtbs/imx23-wirenboard41.dtb
with
fdt_file=/boot/dtbs/imx23-wirenboard41-rs232.dtb
and reboot controller by command
reboot
См. статьи Просмотр файлов контроллера с компьютера и SSH.
Работа
Порт доступен в системе как
/dev/ttyNSC1