Translations:WBE2R-R-ZIGBEE v.1 ZigBee Extension Module/20/en: различия между версиями
(Новая страница: «The SMA connector is installed in a special hole in the controller housing above the Ethernet connectors (drilled into the controller housing starting from the Wi…») |
FuzzyBot (обсуждение | вклад) м (FuzzyBot переименовал страницу Translations:WBE2R-R-ZIGBEE/20/en в Translations:WBE2R-R-ZIGBEE ZIgBee Extension Module/20/en без оставления перенаправления: Часть переводимой страницы WBE2R-R-ZIGBEE.) |
(нет различий)
|
Версия 15:59, 22 апреля 2021
The SMA connector is installed in a special hole in the controller housing above the Ethernet connectors (drilled into the controller housing starting from the Wiren Board 6.5 version). In Wiren Board 6 models of earlier versions, a hole with a diameter of 6.5 mm must be drilled at the specified location. The SMA socket of the module must be fixed in the hole in the housing. When reassembling the housing, make sure that the connecting cable from the module to the SMA socket does not get caught between the indicator and the plastic transparent light guide on the top cover of the controller. The external antenna is screwed onto the SMA socket.