WB 7: Errata/en: различия между версиями
(Новая страница: «The debug console says: <pre> U-Boot SPL 2021.10-wb1.1.1-g4c04347f3e (Feb 03 2022 - 14:48:16 +0000) DRAM: </pre> Normal boot hangs after DRAM line.») |
(Новая страница: «Sometimes the problem only appears if a microSD card is inserted into the controller.») |
||
Строка 55: | Строка 55: | ||
The bootloader incorrectly initializes the RAM by not waiting for the PLL to stabilize before accessing the DRAM chips. | The bootloader incorrectly initializes the RAM by not waiting for the PLL to stabilize before accessing the DRAM chips. | ||
'''Bypasses''' | |||
''' | |||
If a microSD card is inserted, try removing and updating the bootloader as described above. | |||
<div lang="ru" dir="ltr" class="mw-content-ltr"> | <div lang="ru" dir="ltr" class="mw-content-ltr"> |
Версия 19:07, 25 июля 2022
7.2.1 | 7.3 | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
ERRWB70001 | |||||||||||||
Легенда | Не подвержено проблеме | ||||||||||||
Подвержено проблеме, исправляется обновлением ПО | |||||||||||||
Подвержено проблеме |
ERRWB70001: После очередной перезагрузки контроллер не загружается
Affected devices
Wiren Board 7 of all revisions with loader version 1.1.1 released before July 15, 2022
Description
A normally working controller does not turn on after the next power reset. The indication LED lights up yellow for about 20 seconds, then goes out for a few seconds, then the cycle repeats.
The debug console says:
U-Boot SPL 2021.10-wb1.1.1-g4c04347f3e (Feb 03 2022 - 14:48:16 +0000) DRAM:
Normal boot hangs after DRAM line.
Sometimes the problem only appears if a microSD card is inserted into the controller.
Reasons and details
The bootloader incorrectly initializes the RAM by not waiting for the PLL to stabilize before accessing the DRAM chips.
Bypasses
If a microSD card is inserted, try removing and updating the bootloader as described above.
Исправление
Исправлено в U-Boot версии 2021.10-wb1.1.2.
Обновление портировано в stable wb-2204 и в testing.
Для обновления выполните по очереди три команды:
apt update
apt install u-boot-wb7
u-boot-install-wb
Рекомендуется обновить загрузчик на всех контроллерах. Проблема может проявиться на них позже.
Если контроллер уже не загружается, то вернуть его к жизни можно двумя способами:
- записью особого образа на чистую microSD-карту;
- подключением к компьютеру через первый USB-C и запуском утилиты sunxi-fel.