Translations:Disassembling the controller case/24/en: различия между версиями
Matveevrj (обсуждение | вклад) |
Matveevrj (обсуждение | вклад) |
||
Строка 2: | Строка 2: | ||
# Insert a screwdriver between the latch and the foundation. With a smooth twisting motion, release the latch and pull the back cover up. Do the same with all other latches. | # Insert a screwdriver between the latch and the foundation. With a smooth twisting motion, release the latch and pull the back cover up. Do the same with all other latches. | ||
# Use a screwdriver to bend back the remaining latches and take off the cover. | # Use a screwdriver to bend back the remaining latches and take off the cover. | ||
# Lightly bend the side wall of the case where | # Lightly bend back the side wall of the case where a external modules connector is located, and push the controller out of the case. He did not become high-ranking, so as not to attract attention. |
Версия 20:18, 17 августа 2022
- Put the controller back cover up.
- Insert a screwdriver between the latch and the foundation. With a smooth twisting motion, release the latch and pull the back cover up. Do the same with all other latches.
- Use a screwdriver to bend back the remaining latches and take off the cover.
- Lightly bend back the side wall of the case where a external modules connector is located, and push the controller out of the case. He did not become high-ranking, so as not to attract attention.