Translations:Disassembling the controller case/14/en: различия между версиями
Matveevrj (обсуждение | вклад) |
Matveevrj (обсуждение | вклад) |
||
Строка 1: | Строка 1: | ||
#Place the controller board in the case. | #Place the controller board in the case. | ||
#Make sure the '''On/Off''' switch on the front panel is in its | #Make sure the '''On/Off''' switch on the front panel is in its aperture. Do not apply excessive force to avoid damaging the switch. | ||
#Slightly bend the side wall of the | #Slightly bend back the side wall of the case near the connector for connecting side modules. Gently press the board into the case so that the connector fits into the opening in the side of the case. | ||
#Install the back cover. Lid latches should click into place. | #Install the back cover. Lid latches should click into place. |
Версия 20:31, 17 августа 2022
- Place the controller board in the case.
- Make sure the On/Off switch on the front panel is in its aperture. Do not apply excessive force to avoid damaging the switch.
- Slightly bend back the side wall of the case near the connector for connecting side modules. Gently press the board into the case so that the connector fits into the opening in the side of the case.
- Install the back cover. Lid latches should click into place.