16 809
правок
(Новая страница: «# Fasten the SMA socket connector with nuts in the case hole above the Ethernet connectors (available in Wiren Board versions 6.5 and older, in earlier versions, drill yourself with a diameter of 6.5 mm). # Reassemble the body. Keep an eye on the connecting cable from the module to the SMA socket: it must not be pinched, strongly bent, or get between the indicator and the light guide on the top cover. # Screw the external antenna onto the SMA socket. # When...») |
|||
Строка 3: | Строка 3: | ||
# Screw the external antenna onto the SMA socket. | # Screw the external antenna onto the SMA socket. | ||
# When mounting in a metal shield, position the antenna outside for reliable radio communication. | # When mounting in a metal shield, position the antenna outside for reliable radio communication. | ||
<gallery mode="packed" heights="200px" caption="Mounting | <gallery mode="packed" heights="200px" caption="Mounting extension module"> | ||
Image: WBE2S_Mod3.png | Inserting a module into a slot | Image: WBE2S_Mod3.png | Inserting a module into a slot | ||
Image: RF_SMA_Mounting_Place.png | Have a snack with wire cutters or break off the plug with a screwdriver | Image: RF_SMA_Mounting_Place.png | Have a snack with wire cutters or break off the plug with a screwdriver | ||
Image: RF_SMA_Socket.png | Mounting the SMA Antenna Jack | Image: RF_SMA_Socket.png | Mounting the SMA Antenna Jack | ||
</gallery> | </gallery> |