Translations:WB Debug Console/6/en: различия между версиями
Fizikdaos (обсуждение | вклад) (Новая страница: «Debug port on the controller placed into three-pin: GND, RX and TX. To connect: # Insert the USB-UART Adapter into your computer. # Plug the connector pins to the…») |
(нет различий)
|
Версия 19:11, 18 января 2016
Debug port on the controller placed into three-pin: GND, RX and TX. To connect:
- Insert the USB-UART Adapter into your computer.
- Plug the connector pins to the pins of the adapter according to the scheme:
- GND to GND
TX ## to RX
- RX to the TX
- (note: some adapters confused labeling - in this case, try to connect the TX to the TX and RX to RX) </ i>