Wbincludes:Configuration WBC/en: различия между версиями
(Новая страница: «</noinclude> After physically connecting the modem, it must be added to the controller configuration: # In the web interface, go to the '''Settings''' → '''Configs''' → '''Hardware Modules Configuration''' section, select the '''Modem slot'''. # In the drop-down list, select the type of the installed module for '''Module type'''. # Click the '''Save''' button. The controller will enable the ports required for the modem to work.») |
(нет различий)
|
Версия 12:22, 31 мая 2023
After physically connecting the modem, it must be added to the controller configuration:
# In the web interface, go to the Settings → Configs → Hardware Modules Configuration section, select the Modem slot. # In the drop-down list, select the type of the installed module for Module type. # Click the Save button. The controller will enable the ports required for the modem to work.
Для удаления модуля выберите тип None.
После конфигурирования включите модем командой wb-gsm on и настройте подключение к оператору связи.