Wbincludes:Configuration WBC/en: различия между версиями
(Новая страница: «To remove the module, select the '''None''' type.») |
(Новая страница: «After configuration, turn on the modem using the command <code>wb-gsm on</code> and configure the connection to the mobile operator.») |
||
Строка 7: | Строка 7: | ||
To remove the module, select the '''None''' type. | To remove the module, select the '''None''' type. | ||
After configuration, turn on the modem using the command <code>wb-gsm on</code> and configure the connection to the mobile operator.</noinclude> | |||
Версия 12:22, 31 мая 2023
After physically connecting the modem, it must be added to the controller configuration:
# In the web interface, go to the Settings → Configs → Hardware Modules Configuration section, select the Modem slot. # In the drop-down list, select the type of the installed module for Module type. # Click the Save button. The controller will enable the ports required for the modem to work.
To remove the module, select the None type.
After configuration, turn on the modem using the command wb-gsm on
and configure the connection to the mobile operator.