Wbincludes:WBC-4G Info/en: различия между версиями
(Новая страница: «</noinclude> Data exchange with the module is carried out through serial ports <code>/dev/ttyGSM</code> and /dev/ttyUSB'''x''' (usually it is <code>/dev/ttyUSB0</code> and <code>/dev/ttyUSB1</code>).») |
(Новая страница: «If necessary, connection parameters can be changed via AT commands. <noinclude>») |
||
Строка 4: | Строка 4: | ||
{{Wbincludes:GSM Modem Default Connection Parameters}} | {{Wbincludes:GSM Modem Default Connection Parameters}} | ||
If necessary, connection parameters can be changed via [[GSM/GPRS#Sending AT commands|AT commands]]. | |||
<noinclude></noinclude> | |||
<noinclude | |||
Текущая версия на 12:24, 31 мая 2023
Data exchange with the module is carried out through serial ports /dev/ttyGSM
and /dev/ttyUSBx (usually it is /dev/ttyUSB0
and /dev/ttyUSB1
).
Value | Parameter | Description |
---|---|---|
Auto-bauding | Baud rate | Speed, bit/s. Set to 115200 in the connection program settings.
After connecting, send |
8 | Data bits | Number of data bits |
None | Parity | Parity bit |
1 | Stop bits | Number of stop bits |
Off | Hardware flow control | Hardware flow control |
Off | Software flow control | Software flow control |
If necessary, connection parameters can be changed via AT commands.