WBE2-DI-DR-3 Dry Contact Inputs Extension Module/en: различия между версиями
(Новая страница: «Select "WBE2-DI-DR-3: digital inputs extension module" in the Internal slot 1 or 2 section (depending on the slot number) and click Save.») |
(Новая страница: «Once added, additional inputs appear in Devices next to the controller inputs.») |
||
Строка 40: | Строка 40: | ||
Select "WBE2-DI-DR-3: digital inputs extension module" in the Internal slot 1 or 2 section (depending on the slot number) and click Save. | Select "WBE2-DI-DR-3: digital inputs extension module" in the Internal slot 1 or 2 section (depending on the slot number) and click Save. | ||
Once added, additional inputs appear in Devices next to the controller inputs. | |||
Устройство определяется сразу же, перезагрузка не требуется. | Устройство определяется сразу же, перезагрузка не требуется. |
Версия 11:42, 27 июня 2019
Extension module, 3 digital inputs
The module for connection of sensors, counters to the outputs of the type Dry contact or open collector.
The state of the logical zero: input in the air.
Logical 1 state: the input is connected to the ground (GND) of the controller. It is allowed to connect directly or with resistance no more than 300 Ohms.
Installed in slot MOD-1 or MOD-2 controller Wiren Board 6.
Three channels.
Pinout:
Terminal | Function |
---|---|
O1 | Input 1 |
O2 | Input 2 |
O3 | Input 3 |
Configuration
Configuration of the web interface is carried out in the section Configs => Hardware Modules Configuration.
Select "WBE2-DI-DR-3: digital inputs extension module" in the Internal slot 1 or 2 section (depending on the slot number) and click Save.
Once added, additional inputs appear in Devices next to the controller inputs.
Устройство определяется сразу же, перезагрузка не требуется.
MQTT и представление в Web-интерфейсе
Слот | Клемма | Выход | Канал (MQTT) | Топик (MQTT) |
---|---|---|---|---|
MOD1 | O1 | IN1 | wb-gpio/MOD1_IN1 | /devices/wb-gpio/controls/MOD1_IN1 |
O2 | IN2 | wb-gpio/MOD1_IN2 | /devices/wb-gpio/controls/MOD1_IN2 | |
O3 | IN3 | wb-gpio/MOD1_IN3 | /devices/wb-gpio/controls/MOD1_IN3 | |
MOD2 | O1 | IN1 | wb-gpio/MOD2_IN1 | /devices/wb-gpio/controls/MOD2_IN1 |
O2 | IN2 | wb-gpio/MOD2_IN2 | /devices/wb-gpio/controls/MOD2_IN2 | |
O3 | IN3 | wb-gpio/MOD2_IN3 | /devices/wb-gpio/controls/MOD2_IN3 |