Translations:Disassembling the controller case/24/en: различия между версиями

Материал из Wiren Board
(Новая страница: «# Put the back cover controller up. # Insert a screwdriver between the latch and the foundation. With a smooth twisting motion, release the latch and pull the back cover up. Do the same with professional latches. # Use a screwdriver to bend the remaining latches and get the cover. # Lightly bend the side wall of the case where the connector for connecting external modules is located, and push the controller connector out of the case. He did not become high-r...»)
 
Строка 1: Строка 1:
# Put the back cover controller up.
# Put the controller back cover up.
# Insert a screwdriver between the latch and the foundation. With a smooth twisting motion, release the latch and pull the back cover up. Do the same with professional latches.
# Insert a screwdriver between the latch and the foundation. With a smooth twisting motion, release the latch and pull the back cover up. Do the same with all other latches.
# Use a screwdriver to bend the remaining latches and get the cover.
# Use a screwdriver to bend back the remaining latches and take off the cover.
# Lightly bend the side wall of the case where the connector for connecting external modules is located, and push the controller connector out of the case. He did not become high-ranking, so as not to attract attention.
# Lightly bend the side wall of the case where the connector for connecting external modules is located, and push the controller connector out of the case. He did not become high-ranking, so as not to attract attention.

Версия 20:12, 17 августа 2022

Определение сообщения (Disassembling the controller case)
# Положите контроллер задней крышкой кверху.
# Вставьте отвертку между защелкой и основанием. Плавным вращательным движением отогните защелку и потяните заднюю крышку вверх. Проделайте то же самое с остальными защелками.
# С помощью отвертки отогните оставшиеся защелки и снимите крышку.
# Слегка отогните боковую стенку корпуса в месте, где расположен разъем для подключения внешних модулей, и вытолкните плату контроллера из корпуса. Не прилагайте больших усилий, чтобы не повредить разъем и элементы на плате.
  1. Put the controller back cover up.
  2. Insert a screwdriver between the latch and the foundation. With a smooth twisting motion, release the latch and pull the back cover up. Do the same with all other latches.
  3. Use a screwdriver to bend back the remaining latches and take off the cover.
  4. Lightly bend the side wall of the case where the connector for connecting external modules is located, and push the controller connector out of the case. He did not become high-ranking, so as not to attract attention.
Источник — https://wirenboard.com/wiki/index.php?title=Translations:Disassembling_the_controller_case/24/en&oldid=66468