Translations:Первое включение Wiren Board Smart Home/3/en: различия между версиями

Нет описания правки
(Новая страница: «Before work #Be sure to insert the software image microSD card (included) into the device. #Install a micro SIM card (if you plan to use a GSM module). #Check the…»)
 
Строка 14: Строка 14:
'''Do not connect two different power supplies at the same time''', it will burn them and the controller.
'''Do not connect two different power supplies at the same time''', it will burn them and the controller.
The standard power supply is connected to the appropriate connector.
The standard power supply is connected to the appropriate connector.
The power supply on a DIN rail connect the wires to the big terminals Vin and Gnd (next to the relays, see diagram http://contactless.ru/wiki/index.php/%D0%A4%D0%B0%D0%B9%D0%BB:WB3.5.png)
The power supply on a DIN rail connect the wires to the big terminals Vin and Gnd (next to the relays, see [http://wirenboard.com/wiki/index.php/%D0%A4%D0%B0%D0%B9%D0%BB:WB3.5.png diagram)
The Passive PoE power supply is connected by an Ethernet cable.
The Passive PoE power supply is connected by an Ethernet cable.
translator, wb_editors
4390

правок