Translations:WB Modbus Devices Firmware Update/5/en: различия между версиями
(Новая страница: «|right||Bootloader mode indication The device enters bootloader mode if: * the device has the correct firmware —…») |
|||
Строка 1: | Строка 1: | ||
[[ | [[File:Bootloader.gif||right||Bootloader mode indication]] | ||
The device enters bootloader mode if: | The device enters bootloader mode if: | ||
* the device has the correct firmware — the first 2 seconds after power on, the device operates in bootloader mode; | * the device has the correct firmware — the first 2 seconds after power on, the device operates in bootloader mode; | ||
* the device does not have the correct firmware (for example, there was a failure when updating the firmware) — in this case, the bootloader mode is constantly active; | * the device does not have the correct firmware (for example, there was a failure when updating the firmware) — in this case, the bootloader mode is constantly active; | ||
* when the main program in the holding-register 129 (0x81) was recorded 1 — in this case, the device is rebooted and remains in bootloader mode for 120 seconds. | * when the main program in the holding-register 129 (0x81) was recorded 1 — in this case, the device is rebooted and remains in bootloader mode for 120 seconds. |
Версия 17:20, 25 апреля 2019
The device enters bootloader mode if:
- the device has the correct firmware — the first 2 seconds after power on, the device operates in bootloader mode;
- the device does not have the correct firmware (for example, there was a failure when updating the firmware) — in this case, the bootloader mode is constantly active;
- when the main program in the holding-register 129 (0x81) was recorded 1 — in this case, the device is rebooted and remains in bootloader mode for 120 seconds.