Translations:WBIO-DO-R10R-4 Relay Module For Roller Shutter/15/en: различия между версиями

Материал из Wiren Board
(Новая страница: «== Connection to the controller == == Connection to the controller == See Модули ввода-вывода/en#Activating the modules in the controller web i…»)
 
м (FuzzyBot переименовал страницу Translations:Модуль релейных выходов 10A (roller shutter) (WBIO-DO-R10R-4)/15/en в Translations:WBIO-DO-R10R-4 Relay Module For Roller Shutter/15/en без оставления перенаправления: Часть переводимой страницы Модуль релейных выходов 10A (roller shutter) (WBIO-DO-R10R-4).)
 

Текущая версия на 12:51, 22 апреля 2021

Определение сообщения (WBIO-DO-R10R-4 Relay Module For Roller Shutter)
== Подключение к контроллеру ==
Смотрите раздел [[Модули ввода-вывода#Активирование в веб-интерфейсе контроллера|Активирование в веб-интерфейсе контроллера]]. В устройстве Discrete I/O после подключения модуля создадутся контролы EXT(1-8)_DIR(1-4) и EXT(1-8)_ON(1-4). Контролы DIR отвечают за выбор направления (реле R2 на схеме), а контролы ON — за включение и выключение (реле R1 на схеме). Эти контролы в MQTT-сообщениях называются /devices/wb-gpio/controls/EXT'''x'''_DIR'''y''' и /devices/wb-gpio/controls/EXT'''x'''_ON'''y'''.

Connection to the controller

Connection to the controller

See Activating the modules in the web interface of the controller. In the Discrete I/O device, EXT(1-8)_DIR(1-4) and EXT(1-8)_ON(1-4) controls will be created after the module connection. DIR controls are responsible for direction selection (relay R2 on the circuit), and ON controls are responsible for switching on and off (relay R1 on the circuit). These controls in MQTT messages are called /devices/wb-gpio/controls/EXTx_DIRy and /devices/wb-gpio/controls/EXTx_ONy.