Translations:Rule Examples/23/en: различия между версиями

Материал из Wiren Board
(Новая страница: «In the example, the motion sensor is connected to the "dry contact" input, control type "switch". The siren is connected to the built-in Wiren Board relay, and the lamp is connected to the relay box via Modbus. When the "dry contact" input (motion sensor output) is closed, "1" is supplied to the lamp and the relay, and "0" when it is off.»)
 
 
Строка 1: Строка 1:
In the example, the motion sensor is connected to the "dry contact" input, control type "switch". The siren is connected to the built-in Wiren Board relay, and the lamp is connected to the relay box via Modbus. When the "dry contact" input (motion sensor output) is closed, "1" is supplied to the lamp and the relay, and "0" when it is off.
In the example, the motion sensor is connected to the «dry contact» input, control type «switch». The siren is connected to the built-in Wiren Board relay, and the lamp is connected to the relay box via Modbus. When the «dry contact» input (motion sensor output) is closed, «1» is supplied to the lamp and the relay, and «0» when it is off.

Текущая версия на 21:52, 21 сентября 2022

Определение сообщения (Rule Examples)
В примере датчик движения подключен к входу «сухой контакт», контрол типа «switch». Сирена подключена к встроеному реле Wiren Board, а лампа - через релейный блок по Modbus.  Когда вход типа "сухой контакт" (выход датчика движения) замкнут, то на лампу и реле подаётся «1», когда выключен - «0».

In the example, the motion sensor is connected to the «dry contact» input, control type «switch». The siren is connected to the built-in Wiren Board relay, and the lamp is connected to the relay box via Modbus. When the «dry contact» input (motion sensor output) is closed, «1» is supplied to the lamp and the relay, and «0» when it is off.

Источник — https://wirenboard.com/wiki/index.php?title=Translations:Rule_Examples/23/en&oldid=68713