Translations:WB 4: Errata/8/en: различия между версиями

Материал из Wiren Board
(Новая страница: «You must calibrate the channels to obtain the r1 and r2 values for your device. The R2 value has a small spread, so in practice you can limit the value to r1. The…»)
 
 
Строка 1: Строка 1:
You must calibrate the channels to obtain the r1 and r2 values for your device. The R2 value has a small spread, so in practice you can limit the value to r1. The value of r1, obtained when testing in production, can be obtained by request support@contactless.ru (specify S/N of the device).
You must calibrate the channels to obtain the r1 and r2 values for your device. The R2 value has a small spread, so in practice you can limit the value to r1. The value of r1, obtained when testing in production, can be obtained by request support@wirenboard.com (specify S/N of the device).

Текущая версия на 17:43, 7 декабря 2023

Определение сообщения (WB 4: Errata)
Необходимо произвести калибровку каналов для получения значений r1 и r2 для вашего устройства. Значение r2 имеет небольшой разброс, поэтому на практике можно ограничиться значением r1.
Значение r1, полученное при проверке при производстве, можно получить по запросу на support@contactless.ru (укажите S/N устройства).

You must calibrate the channels to obtain the r1 and r2 values for your device. The R2 value has a small spread, so in practice you can limit the value to r1. The value of r1, obtained when testing in production, can be obtained by request support@wirenboard.com (specify S/N of the device).

Источник — https://wirenboard.com/wiki/index.php?title=Translations:WB_4:_Errata/8/en&oldid=77715