Wbincludes:Setup MOD/en
Версия от 16:46, 17 августа 2022; A.Degtyarev (обсуждение | вклад) (Новая страница: «If you bought the modules separately, install them yourself: #Disassemble the controller case. #Insert the module, observing the polarity: the protrusion on it must fit into the groove on the controller board.»)
When ordering modules bundled with the Wiren Board controller, we install them in production - you only need to configure the modules in web interface of the controller.
If you bought the modules separately, install them yourself:
- Disassemble the controller case.
- Insert the module, observing the polarity: the protrusion on it must fit into the groove on the controller board.