Translations:Wiren Board 6.7: Peripherals/6/en
Версия от 22:37, 28 сентября 2022; Matveevrj (обсуждение | вклад)
| Terminal block | Function | GPIO | GPIO number | Output i.mx6UL | Comments |
|---|---|---|---|---|---|
| Outputs A1-A4 | |||||
| A1(out) | FET | GPIO3_IO15 | 79 | LCD_DATA10 | Open collector output; |
| A2(out) | FET | GPIO3_IO16 | 80 | LCD_DATA11 | Open collector output; |
| A3(out) | FET | GPIO3_IO17 | 81 | LCD_DATA12 | Open collector output; |
| A4(out) | FET | GPIO3_IO18 | 82 | LCD_DATA13 | Open collector output; |
| Inputs A1-A4 (inverted; i.e. "1" on gpio appears when there is no voltage at the input) | |||||
| A1 (in) | DI | GPIO3_IO14 | 78 | LCD_DATA09 | |
| A2 (in) | DI | GPIO3_IO13 | 77 | LCD_DATA08 | |
| A3 (in) | DI | GPIO3_IO28 | 92 | LCD_DATA23 | |
| A4 (in) | DI | GPIO3_IO27 | 91 | LCD_DATA22 | |
| Onewire | |||||
| W1 | 1-wire/DI | GPIO3_IO4 | 68 | LCD_RESET | is used by default by the w1-gpio driver |
| W2 | 1-wire/DI | GPIO1_IO11 | 11 | JTAG_TMS | is used by default by the w1-gpio driver |