Translations:WB Debug Console/6/en

Материал из Wiren Board
Версия от 19:11, 18 января 2016; Fizikdaos (обсуждение | вклад) (Новая страница: «Debug port on the controller placed into three-pin: GND, RX and TX. To connect: # Insert the USB-UART Adapter into your computer. # Plug the connector pins to the…»)
(разн.) ← Предыдущая | Текущая версия (разн.) | Следующая → (разн.)

Debug port on the controller placed into three-pin: GND, RX and TX. To connect:

  1. Insert the USB-UART Adapter into your computer.
  2. Plug the connector pins to the pins of the adapter according to the scheme:
    1. GND to GND

TX ## to RX

    1. RX to the TX
    (note: some adapters confused labeling - in this case, try to connect the TX to the TX and RX to RX) </ i>
Источник — https://wirenboard.com/wiki/index.php?title=Translations:WB_Debug_Console/6/en&oldid=7270