Translations:Wbincludes:Configuration MOD/3/en
Версия от 09:23, 18 августа 2022; A.Degtyarev (обсуждение | вклад) (Новая страница: «After the module is physically connected, it must be added to the controller configuration: #In the web interface, go to the section '''Settings''' → '''Configs''' → '''Hardware Modules Configuration''', select the '''Internal slot''' where the module is installed extensions. #In the '''Module type''' drop-down list, select the name of the installed module. #Press the '''Save''' button. The controller will enable the ports required for the module to work.»)
After the module is physically connected, it must be added to the controller configuration:
- In the web interface, go to the section Settings → Configs → Hardware Modules Configuration, select the Internal slot where the module is installed extensions.
- In the Module type drop-down list, select the name of the installed module.
- Press the Save button. The controller will enable the ports required for the module to work.