Translations:Wiren Board 6.7: Peripherals/4/en
Версия от 21:29, 28 сентября 2022; Matveevrj (обсуждение | вклад) (Новая страница: «{| class="wikitable" | "'Port Name in Linux'" | 'Alternate Port Name on Linux ' | "'Connector on controller'" | "'Note'" |- |/dev/ttymxc0 |/dev/ttyCONSOLE | Controller debug-uart (micro-usb) | Default Settings: 115200-8-N-1 |- |/dev/ttymxc1 |/dev/ttyRS485-1 | Signed "RS-485," terminal blocks A and B | Uninsulated port, terminator installed |- |/dev/ttymxc3 |/dev/ttyRS485-2 | Signed "RS-485," terminal blocks A/L and B/H (this port can be used as CAN) | Uninsu...»)
"'Port Name in Linux'" | 'Alternate Port Name on Linux ' | "'Connector on controller'" | "'Note'" |
/dev/ttymxc0 | /dev/ttyCONSOLE | Controller debug-uart (micro-usb) | Default Settings: 115200-8-N-1 |
/dev/ttymxc1 | /dev/ttyRS485-1 | Signed "RS-485," terminal blocks A and B | Uninsulated port, terminator installed |
/dev/ttymxc3 | /dev/ttyRS485-2 | Signed "RS-485," terminal blocks A/L and B/H (this port can be used as CAN) | Uninsulated port, terminator installed, multiplexed with CAN |
/dev/ttymxc2 | /dev/ttyMOD1 | UART on the extension module MOD1 | To appear, you need to set in wb-hardware.conf "Expose UART Pins (DIY)" |
/dev/ttymxc4 | /dev/ttyMOD2 | UART on the extension module MOD2 | To appear, you need to set in wb-hardware.conf "Expose UART Pins (DIY)" |
/dev/ttymxc5 | /dev/ttyMOD3 | UART on the extension module MOD3 | To appear, you need to set in wb-hardware.conf "Expose UART Pins (DIY)" |
/dev/ttymxc6 | /dev/ttyMOD4 | UART on the extension module MOD4 | To appear, you need to set in wb-hardware.conf "Expose UART Pins (DIY)" |
/dev/ttymxc7 | /dev/ttyGSM | UART on WBC expansion module (GSM/3G/4G modem connector) | To appear, you need to set any of the modems in wb-hardware.conf |