Wbincludes:Configuration WBC/en
Версия от 12:22, 31 мая 2023; EvgenyBoger (обсуждение | вклад) (Новая страница: «To remove the module, select the '''None''' type.»)
After physically connecting the modem, it must be added to the controller configuration:
# In the web interface, go to the Settings → Configs → Hardware Modules Configuration section, select the Modem slot. # In the drop-down list, select the type of the installed module for Module type. # Click the Save button. The controller will enable the ports required for the modem to work.
To remove the module, select the None type.
После конфигурирования включите модем командой wb-gsm on
и настройте подключение к оператору связи.