Translations:WB-MIR v1 - Modbus IR Remote Control/23/en
On the example of a fully functional module, consider the main controls of the module and their purpose.
The name of the control | Purpose |
---|---|
Input Voltage | module supply Voltage |
Learn-to-RAM | Write the IR signal in the operational buffer (see section Operational mode). For learning, the control is turned ON, after learning — OFF. |
Play from RAM | Play the IR signal from the operating buffer (see Operating mode). |
Learn to ROMx | IR signal Recording ACC. the cell of the ROM (see section DC mode). For learning, the control is turn ON position, after learning — OFF. |
Play from ROMx | Play IR signal from resp. ROM cells (see Constant mode]). For learning, the control is transferred to THE on position, after learning — OFF. |
ROMx -> RAM | Copy data from ACC. ROM cells to the online buffer for editing (see Constant mode). For editing, control is transferred to THE on position, after editing — OFF. |
Internal/External Temperature Sensor | Internal/external digital temperature sensor. If the sensor is missing or defective, its name is highlighted in red. |
Serial NO | the Serial number of the WB-MIR module may be required when contacting technical support. |
Reset all ROM | Resets the contents of all memory locations. Be careful, ROM cleaning will be done without asking for confirmation! |