Port Name in Linux
|
Alternate Port Name on Linux
|
Connector on controller
|
Note
|
/dev/ttymxc0
|
/dev/ttyCONSOLE
|
Controller debug-uart (micro-usb)
|
Default Settings: 115200-8-N-1
|
/dev/ttymxc1
|
/dev/ttyRS485-1
|
Signed RS-485, terminal blocks A and B
|
Uninsulated port, terminator installed
|
/dev/ttymxc3
|
/dev/ttyRS485-2
|
Signed RS-485, terminal blocks A/L and B/H (this port can be used as CAN)
|
Uninsulated port, terminator installed, multiplexed with CAN
|
/dev/ttymxc2
|
/dev/ttyMOD1
|
UART on the extension module MOD1
|
To appear, you need to set in wb-hardware.conf «Expose UART Pins (DIY)»
|
/dev/ttymxc4
|
/dev/ttyMOD2
|
UART on the extension module MOD2
|
To appear, you need to set in wb-hardware.conf «Expose UART Pins (DIY)»
|
/dev/ttymxc5
|
/dev/ttyMOD3
|
UART on the extension module MOD3
|
To appear, you need to set in wb-hardware.conf «Expose UART Pins (DIY)»
|
/dev/ttymxc6
|
/dev/ttyMOD4
|
UART on the extension module MOD4
|
To appear, you need to set in wb-hardware.conf «Expose UART Pins (DIY)»
|
/dev/ttymxc7
|
/dev/ttyGSM
|
UART on WBC expansion module (GSM/3G/4G modem connector)
|
To appear, you need to set any of the modems in wb-hardware.conf
|