История
19 января 2016
Новая страница: «Here and further N - number of gpio»
−9
Новая страница: «To work through a certain GPIO sysfs it must be exported:»
−57
Нет описания правки
+3
Новая страница: «GPIO under Linux are supported through sysfs-interface.»
−24
Новая страница: «=== sysfs interface in Linux ===»
−8
Новая страница: «On some GPIO (particularly at the 3 GPIO, launched into terminals in Wiren Board rev. 2.8) can be programmatically set to lift 47K + 3.3V. See. Special: MyLangu…»
−80
Новая страница: «<b> All GPIO (as well as other ports Wiren Board) working with voltage 3.3V. In no case do not connect directly to the GPIO signals with voltage over 3.3V! In cas…»
−284
Новая страница: «In Wiren Board rev. 2.8 8 GPIO on a special connector connected via MCP23S08 and temporarily do not work with standard Linux…»
−96
Новая страница: «The correspondence between numbers GPIO Linux and their location and function can be found in the table WB SH 3.5: List of GPIO…»
−76
Новая страница: «In Wiren Board part GPIO output to terminal blocks, connectors on the expansion modules, the other part is used for business purposes. GPIO are also used to contr…»
−157
Новая страница: «Working with GPIO»
+8774