Translations:WB-MRM2-mini Modbus Relay Modules/22/en

Add module to the web interface of the Wiren Board controller

WB-MRMR2-mini module in controller web interface	WB-MRMR2-mini module (older versions) in the controller web interface

The new device is added to the web interface in the section of the corresponding RS-485 port. In the web-interface on the right panel select Configs -> Serial Device Driver Configuration. In the /dev/ttyAPP1 port settings, add a new device (WB-MRM2 or WB-MRMR2-old, see below) by clicking on the '+ Serial device' button in the List of Devices section. Then specify the address of the device and select its type. Details about the device configuration in the web interface Wiren Board see RS-485:Настройка_через_веб-интерфейс/en.