Translations:WB Modbus Devices Firmware Update/47/en
Версия от 07:53, 27 августа 2024; A.Degtyarev (обсуждение | вклад) (Новая страница: «=== Updating all devices on the bus === You can update all devices configured in the '''Serial Devices Configuration''' section of the web interface # Connect the devices via the RS-485 bus to the controller. # Configure the connected devices in the web interface. # Open the controller's console via SSH. # Update all configured devices with the following command: #:<synta...»)
Updating all devices on the bus
You can update all devices configured in the Serial Devices Configuration section of the web interface
- Connect the devices via the RS-485 bus to the controller.
- Configure the connected devices in the web interface.
- Open the controller's console via SSH.
- Update all configured devices with the following command:
wb-mcu-fw-updater update-all