Просмотр кода страницы Модуль релейных выходов WBE-DO-R6C-1/en

<languages/>
[[Файл:WBE-DO-R6C-1.JPG|thumb|  WBE-DO-R6C-1 for Wiren Board 5]]

The module has one SPDT configuration relay (switch contact).


Max current: 6A for 230V AC or 30V DC. The maximum current is specified for the resistive load.

[[Файл:SPDT.svg|200px|thumb|right|Relay output contact diagram]]



=== Pinout: ===

 

{| class="wikitable"
!Terminal
!Function
|-
|O1
|NO
|-
|O2
|NC
|-
|O3
|COM
|}


==Configuration==

 Configuration is carried out in the web interface, section Configs => Hardware Modules Configuration. 

In the Internal slot 1 or 2 section (depending on the slot number) select "WBE-DO-R6C-1" and click Save.

Once added, additional inputs appear in Devices next to the controller inputs.

The device is detected immediately, no reboot is required.


=== MQTT ===

{| class="wikitable"
!Slot
!Channel
!Topic
|-
|MOD1
|wb-gpio/MOD1_OUT1
|/devices/wb-gpio/controls/MOD1_OUT1
|-
|MOD2
|wb-gpio/MOD2_OUT1
|/devices/wb-gpio/controls/MOD2_OUT1
|-
|
|
|
|}


==Technical detail==

The relay control signal is on the IRQ contact of the extension module


=== Compatibility===

The module is compatible with [[Wiren Board 5/en|Wiren Board 5]] controllers of all revisions. MOD1 or MOD2 slots are allowed for inserting the module.