How to find IP address/en
Method 1
При подключении по Wi-Fi контроллер будет доступен по адресу 192.168.42.1.
По умолчанию, для подключения к контроллеру по Wi-Fi не требуется пароль, но вы можете это изменить.
IP addresses of the controller
A controller can have multiple IP addresses because it can connect to networks in several ways:
- via Ethernet - by default gets IP address from router via DHCP,
- via Wi-Fi - by default creates an access point where it has a fixed address 192.168.42.1,
- via GPRS.
So the controller can have up to three IP addresses. To access the controller using the IP address obtained by the controller's Ethernet interface, you must be connected to the same network to which the controller is connected via Ethernet. It is almost impossible to open the controller interface at the address received by the GPRS interface - mobile operators usually give addresses from their own network, and you can browse them from the Internet - see http://sirius.dn.ua/help/real-ip-address/ However, some operators may have a special service.
Зайти на контроллер по адресу, полученному интерфейсом GPRS, практически никогда нельзя - операторы сотовой связи обычно выдают "серые" IP-адреса, и зайти на них из Интернета нельзя.
Method 2
Connect to the controller through the Debug UART port. Once connected, enter your login and password ( by default login:root; password wirenboard), then run the command
ifconfig
Find the output corresponding to the desired interface:
- for Ethernet -
eth0 - for Wi-Fi -
wlan0 - for GPRS -
ppp0
The address will be written after the words inet addr:.
Method 3 (without connecting to the controller)
If you have connected the controller via Ethernet or Wi-Fi to your router, the IP address of the controller can be seen in the web interface of the router. Typically, the menu item name contains the word DHCP.