Translations:How to find IP address/7/en
Версия от 20:54, 22 сентября 2022; Matveevrj (обсуждение | вклад)
IP addresses can be viewed by connecting to the console via Debug UART
Connect to the controller via the debug port Debug UART. After connecting, enter your login and password (by default root - wirenboard), then enter the command
ifconfig
Find the output corresponding to the desired interface:
- for Ethernet -
eth0 - for Wi-Fi -
wlan0 - for GPRS -
ppp0
The address will be written after the words inet addr:.