Translations:Sensors Modbus Management/19/en
Версия от 10:46, 19 июля 2019; RomanKulibaba (обсуждение | вклад) (Новая страница: «{| border="1" class="wikitable" style="text-align:center" !Starting address || Quantity || Purpose || In modifications !From firmware version |- | 0 || 1 || style…»)
| Starting address | Quantity | Purpose | In modifications | From firmware version |
|---|---|---|---|---|
| 0 | 1 | Enable buzzer (buzzer) | WB-MSW2, WB-v MSW.3 | |
| 1 | 1 | Forced calibration of the built-in CO2 sensor. Turn on after 20 minutes of operation at a CO2 level of 400 ppm | WB-MSW2 | |
| 2 | 1 | Turn on the heating (heater) in the temperature and humidity sensor chip HDC1080 | WB-MS (in the 2017 series), WB-MSW2, WB-MSW V. 3 | 3.2.0 |
| 3 | 1 | The inclusion of a CO2 sensor | WB-MSW V. 3 | 4.1.0 |
| 10 | 1 | Green led on | WB-MSW V. 3 | |
| 11 | 1 | Enable red led | WB-v MSW.3 |