Translations:WB-MRM2-mini Modbus Relay Modules/27/en: различия между версиями

Материал из Wiren Board
(Новая страница: «An example of controlling a WB-MRM2-mini relay module with a Wiren Board 5 controller and programming control scenarios will be discussed in a simple layout, wher…»)
 
Строка 1: Строка 1:
An example of controlling a WB-MRM2-mini relay module with a Wiren Board 5 controller and programming control scenarios will be discussed in a simple layout, where the relay module is the only device connected to the controller (see the diagram in [[#Mounting|Mounting]]). Normally open button without fixation is connected to input 1 and GND. 12 V power is supplied to the V+(+) and GND (- ) inputs. The RS-485 A and B inputs/outputs of the first controller port and the WB-MRM2-mini module are connected.
An example of controlling a WB-MRM2-mini relay module with a Wiren Board 6 controller and programming control scenarios will be discussed in a simple layout, where the relay module is the only device connected to the controller (see the diagram in [[#Mounting|Mounting]]). Normally open button without fixation is connected to input 1 and GND. 12 V power is supplied to the V+(+) and GND (- ) inputs. The RS-485 A and B inputs/outputs of the first controller port and the WB-MRM2-mini module are connected.

Версия 18:02, 27 ноября 2019

Определение сообщения (WB-MRM2-mini Modbus Relay Modules)
Пример управления релейным модулем WB-MRM2-mini контроллером Wiren Board 6 и программирования сценариев управления мы рассмотрим на простом макете, когда релейный модуль является единственным устройством, подключенным к контроллеру (см. схему в разделе [[#Монтаж|Монтаж]]). Нормально разомкнутая кнопка без фиксации подключена ко входу 1 и GND. Питание 12 В подается на входы V+(+) и GND (-). Входы/выходы RS-485 A и B первого порта контроллера и модуля WB-MRM2-mini соединены.

An example of controlling a WB-MRM2-mini relay module with a Wiren Board 6 controller and programming control scenarios will be discussed in a simple layout, where the relay module is the only device connected to the controller (see the diagram in Mounting). Normally open button without fixation is connected to input 1 and GND. 12 V power is supplied to the V+(+) and GND (- ) inputs. The RS-485 A and B inputs/outputs of the first controller port and the WB-MRM2-mini module are connected.

Источник — https://wirenboard.com/wiki/index.php?title=Translations:WB-MRM2-mini_Modbus_Relay_Modules/27/en&oldid=36299