Translations:Wiren Board 4:Аппаратная часть/163/en

!colspan="2"| Wired interfaces |- | Ethernet || 10/100 Mbit/s, RJ-45 connector |- || USB 2.0 Host || 2 connectors (one connector is located inside the case) |- || Audiooutput || 3.5 mm connector, stereo |- ||2xRS-485 (one of the ports is insulated)||Software support of Modbus RTU, ADICON/A-BUS/Uniel, and Smartbus G4 protocols |- || Debug console || Debug UART To be connected via USB-UART adapter |- || 2x 1-Wire || Connection of temperature and moister sensors |- !colspan="2"| Connection of sensors |- | 5xADC || 2x up to 24V , 3x - up to 5V |- ||2xInputs for resistive sensors || Connection of 10 kOhm thermistors. The controller can be used as ADC up to 3.3V |- || 4x"Dry contact" |rowspan="2"| Connection of pushbuttons, gerkons, counters with pulse outputs |- || 2x DI (digital input) |-