Translations:Wiren Board 5:Аппаратная часть/190/en: различия между версиями
Fizikdaos (обсуждение | вклад) (Новая страница: «!colspan="2"| '''Wired Interfaces''' |- | Ethernet || 10/100 Mbit/s, 8P8C connector, passive PoE |- || USB 2.0 || 1 connecor. Mode operation USB Host or USB Dev…») |
Fizikdaos (обсуждение | вклад) |
||
Строка 10: | Строка 10: | ||
Software support of Modbus RTU, ADICON/A-BUS/Uniel, HDL, Mercury, Milur | Software support of Modbus RTU, ADICON/A-BUS/Uniel, HDL, Mercury, Milur | ||
|- | |- | ||
||[[Special:MyLanguage/CAN|CAN]] || multiplexed with one RS-485. | ||[[Special:MyLanguage/CAN|CAN]] || are multiplexed with one RS-485. | ||
|- | |- | ||
|| Debug console || [[Special:MyLanguage/Debug UART|Debug UART]] To be connected via USB-UART adapter. | || Debug console || [[Special:MyLanguage/Debug UART|Debug UART]] To be connected via USB-UART adapter. |
Текущая версия на 17:51, 16 ноября 2015
!colspan="2"| Wired Interfaces |- | Ethernet || 10/100 Mbit/s, 8P8C connector, passive PoE |- || USB 2.0 || 1 connecor. Mode operation USB Host or USB Device |- || Audiooutput || Digital audio - S/PDIF, TOSLINK or RCA connector |- ||2xRS-485 ||uninsulated. Software support of Modbus RTU, ADICON/A-BUS/Uniel, HDL, Mercury, Milur |- ||CAN || are multiplexed with one RS-485. |- || Debug console || Debug UART To be connected via USB-UART adapter. |- || 1-Wire || Connection of temperature sensor |- !colspan="2"| Connection of sensors |- | 4x ADC || range 0-24V |- ||2xInputs for resistive sensors || Connection of 10 kOhm thermistors, The controller can be used as ADC up to 3.3V. |- || 4x DI (digital input)