Перейти к содержанию

Навигация

WB-MCM8 Modbus Count Inputs/en: различия между версиями

Нет описания правки
(Новая страница: «The 8-channel discrete and counting input module WB-MCM8 is designed to connect signals of the "dry contact" and "open collector" types - buttons, reed switches, etc. for monitoring the status and counting the number of operations. As well as devices with pulse outputs - for accounting for water, electricity, gas, etc.»)
 
(не показано 9 промежуточных версий 3 участников)
Строка 5: Строка 5:
'''[https://wirenboard.com/product/WB-MCM8/ Buy in the online store]'''
'''[https://wirenboard.com/product/WB-MCM8/ Buy in the online store]'''


===Purpose===
== Purpose==


The 8-channel discrete and counting input module WB-MCM8 is designed to connect signals of the "dry contact" and "open collector" types - buttons, reed switches, etc. for monitoring the status and counting the number of operations. As well as devices with pulse outputs - for accounting for water, electricity, gas, etc.
The 8-channel discrete and counting input module WB-MCM8 is designed to connect signals of the "dry contact" and "open collector" types - buttons, reed switches, etc. for monitoring the status and counting the number of operations. As well as devices with pulse outputs - for accounting for water, electricity, gas, etc.


<div lang="ru" dir="ltr" class="mw-content-ltr">
When connecting momentary switches, the module can recognize up to four types of pressings and transmit pressing events to the controller via Modbus.
При подключении выключателей без фиксации модуль может распознавать до четырёх типов нажатий и передавать события нажатий на контроллер по Modbus.
</div>


<div lang="ru" dir="ltr" class="mw-content-ltr">
==Technical specifications==
=== Технические характеристики ===
</div>


<div lang="ru" dir="ltr" class="mw-content-ltr">
{| border="1" class="wikitable" style="text-align:left"
{| border="1" class="wikitable" style="text-align:left"
|-
|-
!Параметр
!Parameter
!Значение
!Meaning
|-
|-
! colspan="2" |Питание
! colspan="2" |Food
|-
|-
|Напряжение питания
| Supply voltage
|9 28 В постоянного тока
|9 - 28 VDC
|-
|-
|Потребляемая мощность
|Power consumption
|0.1 Вт
|0.1 W
|-
|-
! colspan="2" |Входы
! colspan="2" |Inputs
|-
|-
|Количество входов
|Number of inputs
|8  
|8
|-
|-
|Тип входов
|Type of inputs
|«Сухой контакт», групповая изоляция.  
| "Dry contact", group isolation.
Напряжение на входе ~12 В (~4.5 В до версии v1.1C).  
Input voltage ~12 V (~4.5 V before v1.1C).
Ток при замыкании входа ~2 мА.
The current when the input is closed is ~2 mA.
|-
|-
|Функции
|Functions
|
|
* Счет сигналов (0..2^32-1)
* Signal count (0..2^32-1)
* Вход «сухой контакт»
* Input "dry contact"
* Счет различных типов нажатий при использовании режима входов как кнопки для детектирования нажатий
* Counting different types of presses when using the input mode as a button for pressing detection
|-
|-
|Частота и длительность импульсов
|Frequency and duration of pulses
|Не более 9 Гц (не менее 50 мс) при настройках по умолчанию
|Maximum 9 Hz (minimum 50 ms) at default settings
До 3.1 кГц (не менее 0.2 мс) при записи 0 в регистр параметра времени антидребезга
Up to 3.1 kHz (minimum 0.2 ms) when writing 0 to the debounce time parameter register
|-
|-
! colspan="2" |Индикация
! colspan="2" |Indication
|-
|-
|Индикация питания и обмена данными
| Indication of power and data exchange
|Зеленый светодиод Status (расположен под поверхностью верхней наклейки)
|Green Status LED (located below the surface of the top sticker)
|-
|-
|Индикация замыкания входов
| Indication of closing inputs
|Красно-оранжевые светодиоды 1 7 (расположены под поверхностью верхней наклейки)
|Red-orange LEDs 1 - 7 (located below the surface of the top sticker)
Для канала 8 индикация не предусмотрена.
Channel 8 is not indicated.
|-
|-
{{Wbincludes:Control}}
{{Wbincludes:Control}}
!colspan="2" | '''Клеммники и сечение проводов'''  
!colspan="2" | '''Terminals and wire size'''
|-
|-
|| Рекомендуемое сечение провода с НШВИ, мм<sup>2</sup> || 0.75 1 для входов управления, 2.5 — для силовых входов
|| Recommended wire section with NShVI, mm<sup>2</sup> || 0.75 - 1 for control inputs, 2.5 - for power inputs
|-
|-
|| Длина стандартной втулки НШВИ, мм || 8
|| Length of standard NShVI sleeve, mm || eight
|-
|-
|| Момент затяжки винтов, Н∙м || 0.2  
|| Screw tightening torque, N∙m || 0.2
|-
|-
{{Wbincludes:Dimensions 2U}}
{{Wbincludes:Dimensions 2U}}
{{Wbincludes:Weight}} 90 г
{{Wbincludes:Weight}} 90 г
|}
|}
</div>


<div lang="ru" dir="ltr" class="mw-content-ltr">
== General principle of operation ==
== Общий принцип работы ==
=== Indication ===
=== Индикация ===
[[Image: WB-MCM8 Indication.gif |300px|thumb|right| WB-MCM8 module indication ]]
[[Image: WB-MCM8 Indication.gif |300px|thumb|right| Индикация модуля WB-MCM8 ]]
{{Wbincludes:Module Indication}}
{{Wbincludes:Module Indication}}
* 1–7 — состояние входов: горит вход замкнут. Индикатора для восьмого входа нет.
* 1–7 — status of inputs: lit input is closed. There is no indicator for the eighth entry.
=== Входы ===
=== Inputs ===
[[Файл:DI.png|300px|thumb|right|Цифровые входы DI (первая версия, с напряжением на входах ~4.5 В)]]
[[File:DI.png|300px|thumb|right|DI digital inputs (first version, ~4.5V inputs)]]
Входы WB-MCM8 работают по принципу «сухой контакт» — замыкание входа на землю ignd вызывает срабатывание входа.
The WB-MCM8 inputs work on the principle of "dry contact" - shorting the input to ground ignd causes the input to work.
Есть индикация состояния входов с 1 по 8 и статуса устройства на лицевой крышке.
There is an indication of the status of inputs from 1 to 8 and the status of the device on the front cover.
При поступлении импульса на вход WB-MCM8 загорается соответствующий светодиод, изменяется значение состояния входа, а также увеличивается значение счетчика срабатываний этого входа. Значения всех счетчиков срабатываний записываются в энергонезависимую память устройства. Разрядность счетчиков — 32 бит.
 
</div>
When a pulse arrives at the WB-MCM8 input, the corresponding LED lights up, the value of the input state changes, and the value of the counter of operations of this input increases. The values ​​of all operation counters are recorded in the non-volatile memory of the device. The number of counters is 32 bits.


<div lang="ru" dir="ltr" class="mw-content-ltr">
For each input, the debounce time parameter can be changed. Starting with firmware version 1.2.0, it is possible to measure the pulse frequency at the input. The maximum measured frequency is achieved when the debounce time parameter is set to 0 and depends on the revision of the device - from ~1.2 to ~3.2 kHz.
Для каждого входа можно изменить параметр времени антидребезга. Начиная с версии прошивки 1.2.0, доступно измерение частоты импульсов на входе. Максимальная измеряемая частота достигается при выставлении параметра времени антидребезга в 0 и зависит от ревизии устройства — от ~1.2 до ~3.2 кГц.
</div>


<div lang="ru" dir="ltr" class="mw-content-ltr">
=== Recognition of types of clicks ===
=== Распознавание типов нажатий ===
{{Anchors|press-events}}
{{Anchor|press-events}}
{{note|note|Recognition of types of clicks appeared in firmware 1.3.2.}}
{{note|note|Распознавание типов нажатий появилось в прошивке 1.3.2.}}
In this mode, the frequency of the input signal is not measured.
В этом режиме измерения частоты входного сигнала не происходит.
{{Wbincludes:Inputs Press Events|no_outputs=true}}
{{Wbincludes:Inputs Press Events|no_outputs=true}}
</div>


<div lang="ru" dir="ltr" class="mw-content-ltr">
<div lang="ru" dir="ltr" class="mw-content-ltr">
Строка 180: Строка 169:
</div>
</div>


<div lang="ru" dir="ltr" class="mw-content-ltr">
==Обновление прошивки и сброс настроек==
==Обновление прошивки и сброс настроек==
{{Wbincludes:Firmware update|changelog=WB-MCM8: Changelog}}
{{Modbus Device Firmware Update
</div>
| lose=true
| old=true
|changelog=WB-MCM8: Changelog}}


<div lang="ru" dir="ltr" class="mw-content-ltr">
<div lang="ru" dir="ltr" class="mw-content-ltr">
translator, wb_editors
4218

правок