wb_editors
14 355
правок
WB-MIO Modbus Interface Converters/en: различия между версиями
WB-MIO Modbus Interface Converters/en (просмотреть исходный код)
Версия 21:17, 20 апреля 2021
, 3 года назадЧасть переводимой страницы WB-MIO.
(Новая страница: «[[Драйвер wb-mqtt-serial/en|Wb-mqtt-serial driver] is responsible for working with WB-MIO(-E) connected via RS-485 or Ethernet in the Wiren Board controllers.») |
FuzzyBot (обсуждение | вклад) (Часть переводимой страницы WB-MIO.) |
||
| (не показано 6 промежуточных версий 2 участников) | |||
| Строка 148: | Строка 148: | ||
'''WB-MIO-E''' power is supplied to V+ and GND terminals. Module WB-MIO-E '''does NOT''' support PoE. | '''WB-MIO-E''' power is supplied to V+ and GND terminals. Module WB-MIO-E '''does NOT''' support PoE. | ||
On the default Ethernet network, ''WB-MIO-E''' has a static IP address of 192.168.0.7. To work with the Wiren Board controller software, the Ethernet part of the WB-MIO-E module must be configured in "TCP Server" mode. Detailed instructions on how to configure the Ethernet part of WB-MIO-E can be found on [[WB-MIO-E_AND_WB-MGE_Ethernet_Connection_Setup/en|configuring Ethenet interfaces and connecting WB-MIO-E and WB-MGE modules]]]. | On the default Ethernet network, ''WB-MIO-E''' has a static IP address of 192.168.0.7. To work with the Wiren Board controller software, the Ethernet part of the WB-MIO-E module must be configured in "TCP Server" mode. Detailed instructions on how to configure the Ethernet part of WB-MIO-E can be found on [[WB-MIO-E_AND_WB-MGE_Ethernet_Connection_Setup/en|configuring Ethenet interfaces and connecting WB-MIO-E and WB-MGE modules]]]. | ||
==Connection of I/O modules== | ==Connection of I/O modules== | ||
| Строка 164: | Строка 162: | ||
==Configuration in the web interface== | ==Configuration in the web interface== | ||
[[Драйвер wb-mqtt-serial/en|Wb-mqtt-serial driver] is responsible for working with WB-MIO(-E) connected via RS-485 or Ethernet in the Wiren Board controllers. | [[Драйвер wb-mqtt-serial/en|Wb-mqtt-serial driver] is responsible for working with WB-MIO(-E) connected via RS-485 or Ethernet in the Wiren Board controllers. | ||
To connect [[Модули ввода-вывода/en|'''WBIO''' modules]] via WB-MIO, go to the web interface of the controller, to the Configs tab, select the /etc/wb-mqtt-serial file.conf. Next, you need to add a new Serial device to the required port. In the field "Slave id of the device" specify the address of the WB-MIO device, add a colon, then number on the count of connected I/o module in a row. | |||
For example, if we have only one module connected to WB-MIO, the string "Slave id of the device" for this module will look like this: 15:1. Where 15 is the Modbus address of WB-MIO and 1 is the I/O module account number. In the "Device type" field, select the type of the connected module. Template names for them start with "WBIO-..." | |||
[[Файл:Mio-conf2.JPG|Файл:Mio-conf2.JPG]] [[Файл:Mio-conf3.JPG|Файл:Mio-conf3.JPG]] [[Файл:Mio-conf1.png|Файл:Mio-conf1.png]] | [[Файл:Mio-conf2.JPG|Файл:Mio-conf2.JPG]] [[Файл:Mio-conf3.JPG|Файл:Mio-conf3.JPG]] [[Файл:Mio-conf1.png|Файл:Mio-conf1.png]] | ||
== | ==Modbus Control== | ||
A map of the WB-MIO and WB-MIO-E Modbus registers can be found on [[WB-MIO-Modbus-Registers/en]]. For more information on working with Modbus devices, see [[Протокол Modbus/en|Modbus Protocol]] | |||
== | == Images and drawings of the device == | ||
{{Wbincludes:WBPicturesNoDrawing|1}} | {{Wbincludes:WBPicturesNoDrawing|1}} | ||
<!--{{Wbincludes:WBPictures|1}}--> | <!--{{Wbincludes:WBPictures|1}}--> | ||
{{Wbincludes:WBPictures|2}} | {{Wbincludes:WBPictures|2}} | ||