WBIO-AI-DCM-4 I/O Module/en: различия между версиями

Материал из Wiren Board
(Новая страница: «{| class="wikitable" !Parameter !Value |- ! colspan="2" |voltage measuring Inputs |- | rowspan="2" |Number of inputs |2 (single-ended) |- |1 (differential) |- |In…»)
(Новая страница: «output 2.5 V +/- 0.625 V (FS) |- |Allowable voltage | -5V .. +5V |- |Power output for hall sensors |5V, common to all sensors with short circuit protection |- ! c…»)
Строка 49: Строка 49:
5V power supply,  
5V power supply,  


выход 2.5V +/- 0.625V (FS)
output 2.5 V +/- 0.625 V (FS)
|-
|-
|Допустимое напряжение
|Allowable voltage
| -5V .. +5V
| -5V .. +5V
|-
|-
|Выход питания для датчиков Холла
|Power output for hall sensors
|5V, общий для всех датчиков
|5V, common to all sensors
с защитой от КЗ
with short circuit protection
|-
|-
! colspan="2" |Прочее
! colspan="2" |Other
|-
|-
|Тип модуля
|Module type
|"I" (inverted address scheme)
|"I" (inverted address scheme)
|-
|-
|Максимальная потребляемая мощность
|Maximum power consumption
|0,1 Вт
|0.1 W
|-
|-
|Ширина, DIN юнитов
|Width, DIN units
|2
|2
|-
|-
|Размер
|Size
|36,3x90,2x57,5 мм
|36,3x90,2x57,5 mm
|}
|}



Версия 20:01, 19 июля 2019

Другие языки:

Module is discontinued and replaced by WBIO-AI-DV-12 module

Purpose

The device is designed for tasks that require monitoring of currents and voltages in DC networks, for example for technical metering of electricity.

The device directly measures the voltage and current in the load. The values obtained are used to calculate power (kW) and energy (kWh).

Technical specifications

Contains 4 inputs for Hall sensors for load current measurement and 1 (2) input for voltage measurement.

Parameter Value
voltage measuring Inputs
Number of inputs 2 (single-ended)
1 (differential)
Input type voltage measurement,

uninsulated

Measured voltage 48V DC (0-70V)
Allowable voltage -70V ... +70V DC
Input impedance 10 kOhm
current measuring Inputs
Number of inputs 4
Input type connecting hall sensors
Sensor type open-loop,

5V power supply,

output 2.5 V +/- 0.625 V (FS)

Allowable voltage -5V .. +5V
Power output for hall sensors 5V, common to all sensors

with short circuit protection

Other
Module type "I" (inverted address scheme)
Maximum power consumption 0.1 W
Width, DIN units 2
Size 36,3x90,2x57,5 mm
Габаритные размеры

Подключение к контроллеру

Смотрите раздел Активирование нового модуля в веб-интерфейсе контроллера


Подключение

WBIO-AI-DCM-4 Wiring