WB Dimmers Modbus Registers Map/en: различия между версиями

Материал из Wiren Board
(Новая страница: «{| border="1" class="wikitable" style="text-align:center" !Register / address !type !read-write !default !format !Purpose !Note |-»)
(Новая страница: «| 0 ||holding||RW||-||0-255||Channel level G, logarithmic curve | |- |1||holding||RW||-||0-255||the Level of the R channel, the logarithmic curve | |- |2 |holding…»)
Строка 19: Строка 19:
|-
|-


| 0 ||holding||RW||-||0-255||Уровень канала G, логарифмическая кривая
| 0 ||holding||RW||-||0-255||Channel level G, logarithmic curve
|
|
|-
|-
|1||holding||RW||-||0-255||Уровень канала R, логарифмическая кривая
|1||holding||RW||-||0-255||the Level of the R channel, the logarithmic curve
|
|
|-
|-
Строка 30: Строка 30:
|<nowiki>-</nowiki>
|<nowiki>-</nowiki>
|0-255
|0-255
|Уровень канала B, логарифмическая кривая
|Channel B Level, logarithmic curve
|
|
|-
|-
Строка 38: Строка 38:
|<nowiki>-</nowiki>
|<nowiki>-</nowiki>
|0-255
|0-255
|Уровень канала W, логарифмическая кривая
|Level of the channel W, the logarithmic curve
|WB-MRGBW-D
|WB-MRGBW-D
|-
|-
Строка 53: Строка 53:
|RW
|RW
|0
|0
|0: стандартный режим, 1: отключить управление
|0: standard mode, 1: disable control
|режим работы кнопок
|button operation mode
|
|
|-
|-
Строка 61: Строка 61:
|R
|R
|
|
|1 - нажата, 0 - отпущена
|1 - pressed, 0 - released
|состояние кнопки 1
|the state of the button 1
|
|
|-
|-
Строка 69: Строка 69:
|R
|R
|
|
|1 - нажата, 0 - отпущена
|1 - pressed, 0 - released
|состояние кнопки 2
|button status 2
|
|
|-
|-
Строка 77: Строка 77:
|R
|R
|
|
|1 - нажата, 0 - отпущена
|1 - pressed, 0 - released
|состояние кнопки 3 (WB-MRGBW-D)
|button status 3 (WB-MRGBW-D)
|
|
|-
|-
Строка 86: Строка 86:
|0
|0
|freq = 24 kHz / (value + 1) (0 - 239)
|freq = 24 kHz / (value + 1) (0 - 239)
|частота ШИМ
|PWM frequency
|
|
|-
|-
Строка 94: Строка 94:
|100
|100
|x 10ms (2 - 500)
|x 10ms (2 - 500)
|Время плавного изменения яркости во время включения и выключения
|Time for a smooth change of the brightness during turn on and off
|
|
|-
|-
Строка 105: Строка 105:
|
|
|
|
|количество нажатий кнопки 1
|number of button presses 1
|с версии 1.1.1
|since version 1.1.1
|-
|-
|33
|33
Строка 113: Строка 113:
|
|
|
|
|количество нажатий кнопки 2
|number of button presses 2
|с версии 1.1.1
|since version 1.1.1
|-
|-
|34
|34
Строка 121: Строка 121:
|
|
|
|
|количество нажатий кнопки 3
|number of button presses 3
|с версии 1.1.1
|since version 1.1.1
|-
|-
| 110 || holding || RW || 96 || baud rate / 100 <br> ( 24, 48, 96, 192, 384, 576, 1152 )|| скорость порта RS-485, '''делённая на 100'''. <br>([[UART_Communication_Settings|Настройка параметров обмена данными по RS-485 для modbus-устройств Wiren Board]])
| 110 || holding || RW|| 96 || baud rate / 100 <br> ( 24, 48, 96, 192, 384, 576, 1152 )|| RS-485 port speed, "'divided by 100"'. <br>([[UART_Communication_Settings|configure RS-485 communication parameters for wiren Board modbus devices]])
|
|
|-
|-
| 111 || holding || RW || 0 || 0 - нет бита чётности (none), 1 - нечётный (odd), 2 - чётный (even) || настройка бита чётности порта RS-485.
| 111 || holding || RW|| 0 || 0 - no parity bit (none), 1 - odd (odd), 2 - even (even) || RS-485 port parity bit setting.
|
|
|-
|-
| 112 || holding || RW || 2 || 1 или 2 || количество стоп-битов порта RS-485.
| 112 || holding || RW|| 2 || 1 or 2 || number of stop bits of RS-485 port.
|
|
|-
|-
| 128 (0x80) || holding || RW || 1 || || Modbus-адрес устройства
| 128 (0x80) || holding || RW|| 1 || || Modbus device address
|все
|everything
|-
|-
| 129 (0x81) || holding || RW || 0 || 0 или 1 || Переход в [[WB-MCU-Flasher|режим загрузчика]]  
| 129 (0x81) || holding || RW|| 0 || 0 or 1 || Go to [[WB-MCU-Flasher|bootloader mode]]  
|1.2.0
|1.2.0
|-
|-

Версия 20:11, 19 июля 2019

Другие языки:


Dimmers for LED strips support the following Modbus registers:

Register map

Register / address type read-write default format Purpose Note
0 holding RW - 0-255 Channel level G, logarithmic curve
1 holding RW - 0-255 the Level of the R channel, the logarithmic curve
2 holding RW - 0-255 Channel B Level, logarithmic curve
3 holding RW - 0-255 Level of the channel W, the logarithmic curve WB-MRGBW-D
5 holding RW 0 0: standard mode, 1: disable control button operation mode
6 input R 1 - pressed, 0 - released the state of the button 1
7 input R 1 - pressed, 0 - released button status 2
8 input R 1 - pressed, 0 - released button status 3 (WB-MRGBW-D)
9 holding RW 0 freq = 24 kHz / (value + 1) (0 - 239) PWM frequency
13 holding RW 100 x 10ms (2 - 500) Time for a smooth change of the brightness during turn on and off
32 input R number of button presses 1 since version 1.1.1
33 input R number of button presses 2 since version 1.1.1
34 input R number of button presses 3 since version 1.1.1
110 holding RW 96 baud rate / 100
( 24, 48, 96, 192, 384, 576, 1152 )		 RS-485 port speed, "'divided by 100"'.
(configure RS-485 communication parameters for wiren Board modbus devices)
111 holding RW 0 0 - no parity bit (none), 1 - odd (odd), 2 - even (even) RS-485 port parity bit setting.
112 holding RW 2 1 or 2 number of stop bits of RS-485 port.
128 (0x80) holding RW 1 Modbus device address everything
129 (0x81) holding RW 0 0 or 1 Go to bootloader mode 1.2.0
200-206 input R {'W','B','M','R','G','B'}

0x0057 0x0042 0x004d 0x0052 0x0047 0x0042

сигнатура все
220-241 input R __date__ __time__ дата сборки прошивки все
270-271 holding R Серийный номер устройства WB-MRGBW-D
Источник — https://wirenboard.com/wiki/index.php?title=WB_Dimmers_Modbus_Registers_Map/en&oldid=34220