Wbincludes:Configuration WBC/en: различия между версиями

Версия 12:25, 31 мая 2023

After physically connecting the modem, it should be added to the controller configuration:

In the web interface, go to the Settings → Configs → Hardware Modules Configuration section, select the Modem slot.
In the Module type drop-down list, select the type of the installed module.
Click the Save button. The controller will enable the ports required for the modem to work.

To remove the module, select the None type.

After configuration, turn on the modem using the command wb-gsm on and configure the connection to the mobile operator.

@@ Строка 1: / Строка 1: @@
 <noinclude></noinclude>
-After physically connecting the modem, it must be added to the controller configuration:
+After physically connecting the modem, it should be added to the controller configuration:
- # In the web interface, go to the '''Settings''' → '''Configs''' → '''Hardware Modules Configuration''' section, select the '''Modem slot'''.
- # In the drop-down list, select the type of the installed module for '''Module type'''.
+# In the web interface, go to the '''Settings''' → '''Configs''' → '''Hardware Modules Configuration''' section, select the '''Modem slot'''.
- # Click the '''Save''' button. The controller will enable the ports required for the modem to work.
+# In the '''Module type''' drop-down list, select the type of the installed module.
+# Click the '''Save''' button. The controller will enable the ports required for the modem to work.
 To remove the module, select the '''None''' type.
 After configuration, turn on the modem using the command <code>wb-gsm on</code> and configure the connection to the mobile operator.</noinclude>