Wbincludes:Configuration WBC/en: различия между версиями
| Строка 6: | Строка 6: | ||
# Click the '''Save''' button. The controller will enable the ports required for the modem to work. | # Click the '''Save''' button. The controller will enable the ports required for the modem to work. | ||
To remove the module, select the '''None''' | To remove the module, select the type '''None'''. | ||
After configuration, turn on the modem using the command <code>wb-gsm on</code> and configure the connection to the mobile operator.</noinclude> | After configuration, turn on the modem using the command <code>wb-gsm on</code> and configure the connection to the mobile operator.</noinclude> | ||
Версия 12:25, 31 мая 2023
After physically connecting the modem, it should be added to the controller configuration:
- In the web interface, go to the Settings → Configs → Hardware Modules Configuration section, select the Modem slot.
- In the Module type drop-down list, select the type of the installed module.
- Click the Save button. The controller will enable the ports required for the modem to work.
To remove the module, select the type None.
After configuration, turn on the modem using the command wb-gsm on and configure the connection to the mobile operator.