Wbincludes:WBC-4G Info/en: различия между версиями

Материал из Wiren Board
(Новая страница: «</noinclude> Data exchange with the module is carried out through serial ports <code>/dev/ttyGSM</code> and /dev/ttyUSB'''x''' (usually it is <code>/dev/ttyUSB0</code> and <code>/dev/ttyUSB1</code>).»)
 
(Новая страница: «If necessary, connection parameters can be changed via AT commands. <noinclude>»)
 
Строка 4: Строка 4:
{{Wbincludes:GSM Modem Default Connection Parameters}}
{{Wbincludes:GSM Modem Default Connection Parameters}}


<div lang="ru" dir="ltr" class="mw-content-ltr">
If necessary, connection parameters can be changed via [[GSM/GPRS#Sending AT commands|AT commands]].
При необходимости параметры соединения можно изменить через [[GSM/GPRS#Отправка AT-команд| AT команды]].
<noinclude></noinclude>
<noinclude>
</div></noinclude>

Текущая версия на 12:24, 31 мая 2023

Data exchange with the module is carried out through serial ports /dev/ttyGSM and /dev/ttyUSBx (usually it is /dev/ttyUSB0 and /dev/ttyUSB1).


Default Connection Parameters
Value Parameter Description
Auto-bauding Baud rate Speed, bit/s. Set to 115200 in the connection program settings.

After connecting, send AAAAAAAT to the modem, and it will automatically determine the speed.

8 Data bits Number of data bits
None Parity Parity bit
1 Stop bits Number of stop bits
Off Hardware flow control Hardware flow control
Off Software flow control Software flow control


If necessary, connection parameters can be changed via AT commands.

Источник — https://wirenboard.com/wiki/index.php?title=Wbincludes:WBC-4G_Info/en&oldid=74066