Wiren Board 5: Модуль расширения GPS/Glonass/en: различия между версиями
Fizikdaos (обсуждение | вклад) (Новая страница: «The data come from the module in the format NMEA. To work in Linux, you can use the software gpsd from our repository, or any other.») |
Fizikdaos (обсуждение | вклад) (Новая страница: «Data interchange with the module via the serial port.») |
||
| Строка 21: | Строка 21: | ||
The data come from the module in the format NMEA. To work in Linux, you can use the software gpsd from our repository, or any other. | The data come from the module in the format NMEA. To work in Linux, you can use the software gpsd from our repository, or any other. | ||
Data interchange with the module via the serial port. | |||
Параметры соединения: 9600 8N2. | Параметры соединения: 9600 8N2. | ||
Версия 17:40, 14 января 2016
Extension module with GPS/Glonass module SIM68M.
Determination of coordinates.
The time calibration signal.
Antenna
The module is not equipped with an antenna. Antenna connection is made through u.FL. connector.
When ordering the controller Wiren Board with the module, SMA type antenna connector installed on enclosure connector .
Power supply antenna: 3.3V.
Data
The data come from the module in the format NMEA. To work in Linux, you can use the software gpsd from our repository, or any other.
Data interchange with the module via the serial port.
Параметры соединения: 9600 8N2.
Сигнал PPS выведен на вход "CS" разъёма расширения.
Работа в Wiren Board 5
| Модуль расширения | Последовательный порт | PPS GPIO |
|---|---|---|
| MOD1 | /dev/ttyAPP2 | 91 |
| MOD2 | /dev/ttyAPP3 | 83 |