История
20 сентября 2023
3 июня 2019
Нет описания правки
+1
Нет описания правки
−20
Новая страница: «See FS standart image.»
−31
Новая страница: «Image file rootfs.tar.gz is located inside the rootfs system folder.»
−7
Новая страница: «Ubuntu OS, SD card is connected to the built-in reader and defined as /dev/mmcblk0. [https://github.com/contactless/wirenboard/ The repository] is downloaded, we…»
−115
Новая страница: «==Example==»
−5
Новая страница: «Unmount the file system: <pre> umount /media/user/rootfs </pre>»
−31
Новая страница: «Unpack the image into a section: <pre> sudo tar xfpz rootfs.tar.gz -C /media/$USER/rootfs/ </pre>»
−24
Новая страница: «By default in Ubuntu it is mounted in <b>/media/$USER/rootfs/</b>. Find where the system is mounted on your computer.»
−84
Новая страница: «Now we need to mount the file system we created earlier.'' How to do it in the terminal?''»
−107
Новая страница: «See alsoImage Building»
−17
Новая страница: «Released image (including kernel, dtbs, modules and firmware): [https://github.com/contactless/wirenboard/releases releases]»
−30
Новая страница: «===Copy image to partition===»
−30
Новая страница: «<b>rootfs</b> will become the name of this partition.»
−19
Новая страница: «Find the name of the second section on the flash drive and write it in a variable <pre> MYDISK2="/dev/sdb2" </pre>»
−55
Новая страница: «===Creating an image building file===»
+10
Новая страница: «Now download the partition image to the card <pre> sudo dd if=u-boot.sb of=$MYDISK1 bs=512 seek=4 </pre>»
−27
Новая страница: «Finding the name of the first section, enter it here: <pre> MYDISK1="/dev/sdb1" </pre>»
−24
Новая страница: «Find out the names of the partitions. The script divided the card into partitions, we need to know the name of the first of them. If the device name for the micr…»
−268
Новая страница: «Download image <pre> wget "https://github.com/contactless/wirenboard/blob/master/contrib/u-boot/u-boot.sb.cl25?raw=true" -O u-boot.sb </pre>»
−15
Новая страница: «An image loader to write to the partition: loader[https://github.com/contactless/wirenboard/tree/master/contrib/u-boot u-boot]»
−21
Новая страница: «See Building U-Boot.»
−3
Новая страница: «===Bootloader===»
−8
Новая страница: «Run the script and specify the name of the device with the flash card: <pre> sudo bash create_partitions.sh $MYDISK </pre>»
−44
Новая страница: «Download script: <pre> wget [https://raw.github.com/contactless/wirenboard/master/image/create_partitions.sh] </pre>»
−16
Нет описания правки
+2
Новая страница: «Now we will create card sections using the script. [2] [https://github.com/contactless/wirenboard/blob/master/image/create_partitions.sh]»
−40
Новая страница: «Before starting, make sure that the partitions on the card are not mounted.»
−51
Новая страница: «===Partition table===»
−16
Новая страница: «When the device is found, we create a variable to facilitate the use of the following commands <pre> MYDISK="/dev/sdb" </pre> Between the quotes write the name of…»
−131
Новая страница: «First you need to find out the name of the device with the flash card. Use the search. You can, for example, try to run the program GParted and see it. Dev / dev…»
−161
Новая страница: «*split the flash drive into two sections *boot u-boot to the first partition *create a filesystem on the second partition *copy the root filesystem to the second…»
−60
Новая страница: «According to [http://eewiki.net/display/linuxonarm/iMX233-OLinuXino]»
−4
Новая страница: «===Build together===»
−11
Новая страница: «'''Attention!''' On November 6, 2015 instruction below is also hopelessly outdated.»
−44
Новая страница: «'''Attention!''' This is a complex version of self-preparation of the image of the card. It is better to use the option described above.»
−96
Новая страница: «==Creating an image in parts==»
−21
Новая страница: «An example of the process: <pre> wget https://github.com/contactless/wirenboard/releases/download/0.6-20140614/sdcard_20140614.img.zip unzip sdcard_20140614.img.z…»
−19
Новая страница: «*insert the microSD card into the reader *find out the name of the device corresponding to the map. This is usually /dev/mmcblk0 or /dev/sdX (where X is the lette…»
−438
Новая страница: «=== For Linux ===»
−3
Нет описания правки
−340
Нет описания правки
31 мая 2019
Новая страница: «=== For Windows ===»
−3
Новая страница: «*Go to the [https://github.com/contactless/wirenboard/releases finished images page in Github] and select the desired image: **for Wiren Board 4 - name ends as '…»
−268
Новая страница: «===Selecting the desired image===»
−11
Новая страница: «==Recording the finished image on the card==»
−24
Новая страница: «How to create a microSD card with the image»
+9043