Translations:Fast Modbus/34/en

1. Install the utility using the command:

   apt update && apt install wb-modbus-ext-scanner
   

2. Stop the wb-mqtt-serial driver using the command:

   systemctl stop wb-mqtt-serial
   

3. Execute the command:

   wb-modbus-scanner -d /dev/ttyRS485-1 -b 115200 -s 4267937719 -i 3
   

4. Where, /dev/ttyRS485-1 is the port to which the device is connected, 115200 is the exchange rate, 4267937719 is the device's serial number, 3 is the new slave ID.
5. As a result, the following output should appear:

   Serial port: /dev/ttyRS485-1
   Use baud 115200
   Change ID for device with serial   4267937719 [FE638FB7] New ID: 3
   

6. Start the wb-mqtt-serial driver again using the command:

   systemctl start wb-mqtt-serial