|
|
back
|
|
|
00 |
01 |
10 |
11
|
front
|
00
|
(0) — Input is disabled, does not control outputs
|
(1) — Disable when opening circuit
|
(2) — Enable when circuit is open
|
(3) — Change the exit status when closing
|
01
|
(4) — Turn off when snapping
|
(5) — Always turn off
|
(6) —Work as an inverted safety switch with separate actuator
|
(7) — Turn off when opening, then change state when switching
|
10
|
(8) — Turn on when the circuit is closed
|
(9) — To work like locking swich (repeat sign)
|
(10, 0x0A)— Always turn on
|
(11, 0x0B) — Enable, then change the state when opening
|
11
|
(12, 0x0C) — To change the output state in short ("'non-latching switch"')
|
(13, 0x0D) — Change state, then turn off when opening
|
(14, 0x0E) — Change state, then turn off when circuit is open
|
(15, 0x0F) — Change the state when closing and return to the original state when opening
|