Translations:RS-485: Wiring and Connection/8/en
Also, for bus laying, you can use a conventional twisted pair CAT5 for Ethernet - for it below is a standard wiring diagram (the usual wave resistance of such cable is 100 Ohms).
| Bus signal RS-485 | Wire |
|---|---|
| Data A |  white-green
|
| Data B |  green
|
| power supply (12V or other) |  orange
|
| power supply (12V or other) |  white-orange
|
| not used |  blue
|
| not used |  white-blue
|
| ground power supply(GND) |  white-brown
|
| ground power supply (GND) |  brown
|