Translations:WB-MCM8 Modbus Count Inputs/38/en

Материал из Wiren Board
Parameter Meaning
Food
Supply voltage 9 - 28 VDC
Power consumption 0.1 W
Inputs
Number of inputs 8
Type of inputs "Dry contact", group isolation.

Input voltage ~12 V (~4.5 V before v1.1C). The current when the input is closed is ~2 mA.

Functions
  • Signal count (0..2^32-1)
  • Input "dry contact"
  • Counting different types of presses when using the input mode as a button for pressing detection
Frequency and duration of pulses Maximum 9 Hz (minimum 50 ms) at default settings

Up to 3.1 kHz (minimum 0.2 ms) when writing 0 to the debounce time parameter register

Indication
Indication of power and data exchange Green Status LED (located below the surface of the top sticker)
Indication of closing inputs Red-orange LEDs 1 - 7 (located below the surface of the top sticker)

Channel 8 is not indicated.

Управление
Интерфейс управления RS-485
Изоляция интерфейса Неизолированный
Протокол обмена данными Modbus RTU, адрес задается программно, заводские настройки указаны на наклейке
Параметры интерфейса RS-485 Задаются программно, по умолчанию:

скорость — 9600 бит/с; данные — 8 бит; бит чётности — нет (N); стоп-биты — 2

Готовность к работе после подачи питания ~2 c
Terminals and wire size
Recommended wire section with NShVI, mm2 0.75 - 1 for control inputs, 2.5 - for power inputs
Length of standard NShVI sleeve, mm eight
Screw tightening torque, N∙m 0.2
Габариты
Ширина, DIN-юнитов 2
Габаритные размеры (Д x Ш x В) 36 x 90 x 58 мм
Масса (с коробкой) 90 г