In Windows - right click on the PuTTY icon and select Run This Program As An Administrator
in Linux - run gksu putty
In the left menu, select the last item - Serial . In the fields that appear on the right, enter the port settings:
title serial port
for Windows - it COM4 ( 'figure may vary' , can be found through the exact 'Device Manager', finding in it the adapter USB-UART)
for Linux - it / dev / ttyUSB0 ( 'figure may vary' , see the list of files in the folder / dev / )
Speed - '115200'
number of bits in a parcel - 8
number of stop bits - 1
parity - No
flow control - No
In the left menu, select the first point - Session . The right to switch the connection type Serial - in field have to get the port settings. Then press the Open .
To see if you did it right:
for Wiren Board 5.8 and higher: press Enter. You are prompted to log in.
for Wiren Board 5.6 and lower, up to v.2.8: press the button to turn off and turn on the controller - the screen should display boot messages.
login prompt - enter "root" and press "Enter",
password prompt - enter "wirenboard" (no characters will be displayed) and press "Enter".
A welcome message appears - you are in the controller console. To go to the visual file Manager, type mc.
