Translations:Wbincludes:Mount MOD/1/en

Материал из Wiren Board
  1. Fasten the SMA socket connector with nuts in the case hole above the Ethernet connectors (available in Wiren Board versions 6.5 and older, in earlier versions, drill yourself with a diameter of 6.5 mm).
  2. Reassemble the body. Keep an eye on the connecting cable from the module to the SMA socket: it must not be pinched, strongly bent, or get between the indicator and the light guide on the top cover.
  3. Screw the external antenna onto the SMA socket.
  4. When mounting in a metal shield, position the antenna outside for reliable radio communication.
  • Mounting extension module

  • Inserting a module into a slot

  • Have a snack with wire cutters or break off the plug with a screwdriver

  • Mounting the SMA Antenna Jack

Источник — https://wirenboard.com/wiki/index.php?title=Translations:Wbincludes:Mount_MOD/1/en&oldid=66572